Tektronix TDS 500C Performance Verification Manual

Performance Tests
1–88
TDS 500C, TDS 600B & TDS 700C Performance Verification and Specifications
Table 1–7: Reference Receiver Filter Options:
Option 4C – SONET (P6703B 1300nm) Option 3C – Fibre Channel (P6701B 850nm)
52Mbit OC1 FC133Mbit
FC266Mbit
FC531Mbit
155Mbit OC3 155Mbit OC3
622Mbit OC12 622Mbit OC12
FC1063 (TDS784C Only) FC1063 (TDS784C Only)
Table 1–8: Option 3C and 4C Specifications
Name Description
Calibration Range, Reference Receiver 10 mW per division
20 mW per division
50 mW per division
Temperature Range, Warranted Filter 23_ C, "5_ C
Calibration Range, Controlled Up to 2X the data rate for all filters except
FC1063 filter
Up to 1.5X the data rate for FC1063 filter
Table 1–9: Available receivers
Option 4C
1
Option 3C
2
OC1
4
OC3 OC12 FC1063
3
FC133 FC266 FC531 FC1063
3
OC3 OC12
TDS 520C n n n n
TDS 540C n n n n n n n n
TDS 724C n n n n
TDS 754C n n n n n n n n
TDS 784C n n n n n n n n n n
1
Requires Tektronix P6703B, 1300 nm Optical to Electrical Converter.
2
Requires Tektronix P6701B, 850 nm Optical to Electrical Converter.
3
Reference receivers are warranted to 2.0 times the bit rate except for FC1063 which is warranted to 1.5 times the bit rate.
4
OC1 is type tested

Tektronix TDS 500C Specifications

General

Brand	Tektronix
Model	TDS 500C
Category	Test Equipment
Language	English