TDS 500C, TDS 600B & TDS 700C Performance Verification and Specifications
ix
Preface
This is the Performance Verification and Specifications for the TDS 500C,
TDS 600B, and TDS 700C Oscilloscopes. It contains procedures suitable for
determining if each instrument functions, was adjusted properly, and meets the
performance characteristics as warranted. The following models are covered:
TDS 500C: TDS 520C and TDS 540C
TDS 600B: TDS 620B, TDS 644B, TDS 680B, and TDS 684B
TDS 700C: TDS 724C, TDS 754C, and TDS 784C
This document also contains the technical specifications for these oscilloscopes.
Related Manuals
The following documents are related to the use or service of this digitizing
oscilloscope:
H The TDS 500C, TDS 600B & 700C User Manual describes how to use this
digitizing oscilloscope.
H The TDS Family Programmer Manual describes using a computer to control
the digitizing oscilloscope through the GPIB interface.
H The TDS 500C, TDS 600B & 700C Reference describes a quick overview of
how to operate your digitizing oscilloscope.
H The TDS 500C, TDS 600B & 700C Service Manual describes information
for maintaining and servicing the digitizing oscilloscope to the module level.
To Next Page
Loading...
Need help?
General
