Tektronix TDS3034C Service Manual

Service Manual
TDS3000C Series
Digital Phosphor Oscilloscopes
071-2507-00
This document supports firmware version 4.00
and above for TDS3000C Series instruments only.
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

Tektronix TDS3034C Specifications

General

Bandwidth	300 MHz
Channels	4
Sample Rate	2.5 GS/s
Display Type	Color LCD
Vertical Resolution	8 bits
FFT	Yes
Interfaces	USB, GPIB, Ethernet
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Trigger Modes	Edge, Pulse, Video, Logic
Maximum Input Voltage	300 V (DC + peak AC)
Power Requirements	100 to 240 VAC, 50/60 Hz
Memory Depth	10, 000 points
Input Impedance	1 MΩ ± 2%