Tektronix TDS6000 Series Service Manual

Removal and Installation Procedures
6-- 38
TDS7104 & TDS7054 Service Manual
c. Grasp the low-voltage power supply and carefully slide the assembly out
of the oscilloscope.
4. Reinstallation: Do in reverse steps a through c to reinstall the low-voltage
power supply.
T--15 Torx
screw (3)
T--15 Torx
screw (2)
Low--voltage
power supply
Figure 6--23: Low-voltage power supply removal

Tektronix TDS6000 Series Specifications

General

Brand	Tektronix
Model	TDS6000 Series
Category	Test Equipment
Language	English