Tektronix TDS7104

Table of Contents
viii
TDS7104 & TDS7054 Service Manual
List of Tables
Table 1--1: TDS7000 models 1--1.................................
Table 1 -- 2: Channel input and vertical specifications 1--5............
Table 1--3: Horizontal and acquisition system specifications 1--10......
Table 1--4: Trigger specifications 1--12.............................
Table 1--5: Display specifications 1--15.............................
Table 1 -- 6: Input/output port specifications 1--16....................
Table 1--7: Data storage specifications 1--18........................
Table 1--8: Power source specifications 1--18........................
Table 1--9: Mechanical specifications 1--19.........................
Table 1--10: Environmental specifications 1--20.....................
Table 1--11: Certifications and compliances 1--21....................
Table 2--1: Additional accessory connection information 2--2.........
Table 2 -- 2: Line fuses 2--4......................................
Table 4 -- 1: Required equipment and materials 4--17.................
Table 4 -- 2: Test sequence overview 4--19...........................
Table 4--3: GPIB devices required by test program 4--21.............
Table 4 -- 4: Test equipment 4--28..................................
Table 4--5: DC Voltage measur ement accuracy 4--37.................
Table 4--6: Gain accuracy 4--41...................................
Table 4 -- 7: Analog bandwidth 4--46...............................
Table 4--8: Delay between channels worksheet 4--52.................
Table 4--9: Delta time measuremen t 4--64..........................
Table 5 -- 1: Adjustments required for module replaced 5--1...........
Table 5 -- 2: Required equipment and materials 5--2.................
Table 5--3: GPIB devices required by test program 5--6.............
Table 5 -- 4: Renaming the GPIB devices 5-- 8.......................
Table 5 -- 5: Setting the GPIB addresses 5--9........................
Table 6--1: External inspection check list 6--3......................
Table 6--2: Internal inspection check list 6--4......................
Table 6--3: Tools required for module removal 6--8.................
Table 6--4: Failure symptoms and possible causes 6--51...............
Table 6 -- 5: Power supply voltages 6--56............................