04 05
Disclaimer Notice, Safety Recommendations & Important
Information
Thank you for purchasing POWERTXT®. This product is a
plug/socket designed to control AC power remotely by SMS
through the GSM (mobile) network, allowing users to remotely
control power to any equipment connected to it. It also sends an
instant power outage/power cut alert (and power restore alert).
It is a completely wireless M2M (machine to machine) device,
it only requires power. This product uses any 2G network SIM
(this product is not designed to work with 3G ONLY networks
e.g. the Three Network), it will work with 3G SIMs that are 2G
backward compatible (this is most networks & SIMs). This
instruction manual provides both a quick start set up and
also more advanced settings.
Powertxt® is designed for any electrical appliance for business
use up to 13 Amps for the UK version and 16 Amps for the EU
version with a power consumption of up to 3 Kw. It can be used
for any type of device and UK/EU plug to IEC13 converters for
servers etc are available.
We operate a policy of continuous development and therefore
we reserve the right to make changes and improvements to the
design, functionality or any part of this product as described in
this document without prior notice. For the latest information
please contact your supplier. We cannot be held responsible in
anyway should this product be used other than for the intended
purpose. Every effort has been taken to ensure the accuracy of
this document however we accept no responsibility for any
damage, injury, loss or expense resulting from errors or
omissions whether consequential or indirectly and however
caused due to the use of this product.
The power loss SMS alert/notification is by default automatically
ON and alerts are always sent when the power is lost or restored
(network dependent).
Please read this important information;
• ALL services and functions of this product need to be
supported by the GSM (mobile) network and a SIM card
• The SIM card mobile number is referred to as the mobile
number in this manual
• Before using this product check that mobile phones can be
used in the area
• We recommend before choosing your network SIM provider
you check the network signal strength where you intend to
use the product to make sure it is sufficient
• Be sure to keep the password and mobile number safe and
do not disclose this information to anyone other than the
authorised users in order to ensure there is no misuse
• A SIM card is required to use this product, we recommend
using a M2M (machine to machine)/Contract SIM card but if
a PAYG (Pay as you go) SIM card is used please ensure that
the SIM card has credit at all times for this product to be
effective
• The password must be a 4 digit number
• The maximum digits that are allowed for the mobile number is
sixteen
• Powertxt® will reply to each SMS command that is sent to it
(network dependent) (except when changing the master
number)
• The # symbol must not be ignored when typing an SMS
command
• Do not include any spaces within the commands
To Next Page
Loading...