EasyManua.ls Logo

Tekview POWERTXT - Warranty

Tekview POWERTXT
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
06 07
Should Powertx not function as detailed in this instruction
book, please contact your supplier for technical support
The power loss/restore feature is automatically enabled
Please keep the password safe
Warning Powertx is not designed for use in, and should not
be used for, domestic or medical applications. This product
doesnt guarantee a safe power source disconnection, only
functional switching of power is performed.
The product contains no serviceable parts and no internal
adjustments are required. No attempt must be made to repair
this product. Faulty units must be returned to the supplier.
Improper use, disassembling or product modification causes
warranty loss.
This product is designed for indoor use only, do not use in a
wet, chemically aggressive or dusty environment
Do not use alcohol, acetone and other similar solvents to
clean it, simply wipe the outside of the product with a soft
moist cloth
Powertx contains no serviceable parts and no internal
adjustments are required
Powertx uses wireless signal transmissions, please keep it
away from electronic equipment that may be likely to cause
interference
Keep Powertx and its accessories out of reach of children
Do not attempt to programme it except as instructed, if there
is a problem please try and resolve it through the general
troubleshooting section, if the problem cannot be solved
please contact your supplier for technical support
Warranty
Powertx has a 12 month return to base warranty when
purchased. The seller undertakes to replace or repair, at its
option, any goods supplied by the seller if a fault occurs that
cannot be resolved with telephone/email support under
conditions of normal and proper use and maintenance (fair wear
and tear accepted), provided that all of the following are true;
1) The goods were operated and maintained in accordance with
the sellers operating instructions
2) The faulty unit is reported promptly to the seller in writing
3) The defect occurs within 12 months from the date of
purchase of the goods by the buyer from the seller or
reseller/distributor (proof of purchase date is required)
4) The goods have not been repaired or modified by anyone
other than the seller or at the sellers direction
5) The device has not been tampered with in anyway
A replacement physical good or part assumes the remaining
warranty of the original physical good or 180 days from the date
of the replacement of the repair, whichever is longer. If you
believe your unit is faulty or not functioning in the way as laid out
in this manual in the first instance please contact your supplier
with the following information;
Product Description, Fault Description, Serial Number & Proof of
Purchase (inc date & seller information)
EstateView Software
Powertx can be controlled easily by a mobile phone however
for control of multiple Powertx units we have developed a
dedicated management software solution called EstateView.
EstateView is an online portal that allows you to control your
equipment just like you would through your mobile phone,