3.2.1 Standalone
The Teldat V router can be placed as a standalone on a flat, stable surface.
Please ensure there is enough space around the router for ventilation purposes and that the electricity cables can
comfortably reach it.
3.2.2 Wall mounting
The Teldat V can be mounted on the wall.
Two slots on the underside of the device can be used to fix it to the wall. You can see this in “ Underside Panel on
page 5
You must purchase the screws and wall anchors. We recommend the following accessories for wall mounting, valid
for solid wall and Gypsum board (plaster) wall:
• 2 screws: [COACH SCREW HEAD 90 DEGR.POZIDR. 3,5x30]
Fig. 6: Screw
• 2 wall anchors: [WHITE STRIATED WALL ANCHOR DIAM.8mm]
Fig. 7: Wall anchor
Warning
The screws must go into a wall stud (wood) or a wall anchor of the appropriate type for the wall. Screws
into drywall are not strong enough to hang the router.
3 Components and Power Supply Teldat S.A.
8 Teldat V Router
To Next Page
Loading...
Need help?
General
