Changing pushbutton function
Read data setting from e-Card.
1. From main (Function-Setting) page, click any function blocks you would like to program. The
pushbutton function table will drop down immediately.
2. Select any function block from the list.
3. To change the other pushbutton function setting, please repeat steps 2 and 3.
Note: For further information about the function definition, please refer to the ANNEX for more
detail explanation.
Saving the file:
To complete function setting and customer information of the remote, please make a copy on your
computer for after service and future data management.
1. Click “SAVE file” button
2. Select the saving folder and file name.
3. Then save the file.
Load the file data:
1. Click “LOAD” button.
2. Select the file name then press “OPEN”.
Filing user information:
Click "User-Information", you may store user information such as company name, purchasing date,
address, and phone etc.
To Next Page
Loading...
Need help?
General
