Teledyne 4060 Series User Manual

INSTRUCTION, OPERATING AND
MAINTENANCE MANUAL FOR
SERIES 4060
DANGER
Toxic and/or flammable gases or liquids may be present in this monitoring system.
Personal protective equipment may be required when servicing this instrument.
Hazardous voltages exist on certain components internally which may persist for
a time even after the power is turned off and disconnected.
Only authorized personnel should conduct maintenance and/or servicing. Before
conducting any maintenance or servicing, consult with authorized
supervisor/manager.
P/N M76417
DATE 06/29/10

Teledyne 4060 Series Specifications

General

Brand	Teledyne
Model	4060 Series
Category	Analytical Instruments
Language	English

Summary

Safety Messages

General Warnings and Cautions

General warnings about specific procedures that could cause injury or instrument damage.

Electrical Shock and Hot Surface Hazards

Warns about dangerous voltages and hot components within the instrument.

Symbol Definitions

Defines safety alert symbols and explains their meaning.

Additional Safety Precautions

Combustible Gas Usage Warning

Alerts to the danger of combustible gas usage and the need for proper operation.

Internal Shock Hazard Removal Procedure

Installation and Connections

Unpacking and Mounting

Instructions for unpacking, inspecting, and physically installing the analyzer.

Electrical Power Connections

Details how to connect the analyzer to the power supply.

Electronic Connections

Covers connections for digital communications and analog outputs.

Gas Connections

Details the connection points for sample, span, fuel, air, and carrier gases.

System Operation

Setup and Preparation

Covers required equipment, preliminary checks, and activating support gases.

Analyzer Operation and Configuration

Covers navigation, parameter settings, calibration, alarms, and diagnostics.

System Control Functions

Explains password protection, logging out, and standby mode.

Maintenance and Troubleshooting

Electrical Circuit Checks

Procedures for troubleshooting issues within the measuring circuit electronics.

Temperature Control Checks

Troubleshooting the analyzer's temperature control circuitry.

Ignition and Flame Guard Checks

Procedures to diagnose issues with flame ignition and the flame guard circuit.

Sampling System Troubleshooting

Addresses potential problems within the gas control and sampling systems.

Printed Circuit Board Descriptions

Details the function and description of key PCBs.