Teledyne 4040 User Manual

Teledyne Analytical Instruments i
INSTRUCTION, OPERATING AND
MAINTENANCE MANUAL FOR
MODEL 4040
DANGER
Toxic and/or flammable gases or liquids may be present in this monitoring system.
Personal protective equipment may be required when servicing this instrument.
Hazardous voltages exist on certain components internally which may persist for
a time even after the power is turned off and disconnected.
Only authorized personnel should conduct maintenance and/or servicing. Before
conducting any maintenance or servicing, consult with authorized
supervisor/manager.
P/N M4040
ECO: #XX-XXXX
DATE 02/22/06

Teledyne 4040 Specifications

General

Accuracy	±1% of full scale
Response Time	<15 seconds
Operating Temperature	0-50°C
Output	4-20 mA, RS-232
Range	0-100% O2

Summary

Safety Information

Safety Symbol Definitions

Defines safety alert symbols used in the manual and on the instrument.

Hazard Warnings and Prevention

Details combustible gas, electrical shock hazards, and shock prevention steps.

Introduction and Theory

Analyzer Overview and Operation Principle

Lists key features, explains FID detection, column separation, and hydrocarbon measurement.

System Description and Installation

Covers sample system, detection cell, installation steps, connections, and gas setup.

Analyzer Operation

Navigation, Menus, and Basic Functions

Explains analyzer operation, navigation, menu structure, and key functions.

Calibration, Configuration, and Diagnostics

Covers span calibration, alarms, range selection, output settings, and diagnostics.

Standby and Advanced User Functions

Details standby mode and advanced user functions like timing.

Appendix

Specifications, Parts, and Drawings

Lists technical specifications, spare parts, and drawing references.