7
# Dialing It can be regarded as the first number being dialed out
or the end mark for ending number.
2.1.2 Function table of handset keyboard
Name Status Function
ON/OFF Switch for ON and OFF
Hold Call Call waiting
Mute Call Mute
Redial
Dialing Re-dial the last called number
Volume + Call Increase the volume
Volume -
Call Decrease the volume
Flash Off-hook Hung up the phone and then pick up the phone
Dialing “1”
1
On-hook Holding down of “1” key for messages
2
Dialing “2”
3
Dialing “3”
4
Dialing “4”
5 Dialing “5”
6
Dialing “6”
7
Dialing “7”
8 Dialing “8”
9
Dialing “9”
0
Dialing “0”
Dialing “*”
*
Off-hook Press for 3 seconds and into the registration status
# Dialing It can be regarded as the first number being dialed out
or the end mark for ending number.
2.2 Functions of keyboard
2.2.1 Store numbers:
Press “STORE” key to enter into the setting state of storing keys, and input
the storing number, then press the corresponding storing key to store the
numbers.
2.2.2 Call volume control
Press “VOL+” to increase the volume, and “VOL-“ to decrease the volume.
2.2.3 Hold function
It is used for holding the current line or forwarding to other handset, for
example:
When you use the #1 handset and want to use the #2 in a call, now you
need to hold the #1 handset then pick up the #2 handset.
2.2.4 Register handset
Under On-Hook status, pressing the “Locate” key on the base unit for three
seconds to enable the handset register mode, and the Charge indicator light
flashes at the same time; then press the “*”key for three seconds to enable the
To Next Page
Loading...
