EasyManua.ls Logo

Telephonics Trulink - General; Introduction; Definitions and Abbreviations

Telephonics Trulink
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T ELEPHONICS C ORPORATION
TM115007 REV A (04/07) 1-1
USE OR DISCLOSURE OF DATA CONTAINED ON THIS PAGE IS SUBJECT TO THE
RESTRICTION ON THE TITLE PAGE OF THIS DOCUMENT.
C
OMMUNICATION S YSTEMS D IVISION
CHAPTER 1
GENERAL
1.1 INTRODUCTION
This document will introduce the operator to the many features and capabilities of TruLink
®
Wireless
Intercommunication System. It will provide the operator with the instructions necessary for the
proper handling and operation of TruLink and its component parts, and basic instructions for
maintaining the TruLink in proper working order.
1.2 DEFINITIONS AND ABBREVIATIONS
1.2.1 Definitions of Terms Used
The definitions of terms used in this document are as follows:
Channel A collection of specific frequencies that define the RF link.
Network A collection of slaves and one master that form the communication group.
Sidetone User’s own audio heard in the user’s ear.
1.2.2 Abbreviations and Acronyms
Abbreviations and acronyms used in this document are listed below:
BIT Built-in Test
FHSS Frequency Hop Spread Spectrum
LPD Low Probability Detection
LPI Low Probability Intercept
mAh milli-Ampere hour
NiMH Nickel Metal Hydride
NVG Night Vision Goggles
PTT Push-To-Talk
SynVoice Synthetic Voice (recorded voice messages)
TAP TruLink Access Point Transceiver
TPT TruLink Portable Transceiver

Table of Contents