To Next PageTo Next Page
Need help?Do you have a question about the Telephonics Trulink and is the answer not in the manual?
General| Brand | Telephonics |
|---|---|
| Model | Trulink |
| Category | Intercom System |
| Language | English |
Provides an overview of the manual's purpose and scope.
Lists terms and acronyms used in the document.
Describes the features and capabilities of the TruLink system.
Explains how TruLink units form a network with master/slave roles.
Details the modulation techniques and rugged construction of TruLink.
Lists the components of the TruLink system with part numbers.
Introduces the TruLink Portable Transceiver (TPT) and its interface.
Describes the TPT's physical characteristics, dimensions, and weight.
Covers battery installation, type, warnings, and charging procedures.
Details antenna replacement and headset configuration for the TPT.
Explains visual and audible indicators for TPT status and operation.
Details how to power on/off, start up, and use the TPT interface.
Covers TPT settings like channel, VOX, key lock, and LED configuration.
Details methods for speaking on the network, including VOX, PTT, and emergency.
Explains volume control and the 'NO SERVICE' indication.
Describes key-click sounds and power-on BIT failure indications.
Outlines the steps to perform before using the TPT unit.
Introduces the TruLink Access Point (TAP) and its role in the network.
Covers TAP mounting and connector types for installation.
Details TAP power, echo elimination, channel synchronization, and master change.
Outlines the steps to perform before using the TAP.
Introduces the Dual Port Transceiver (DPT) and its function.
Describes the DPT's physical characteristics, noting similarity to TPT.
Details DPT operation, ICS interface, and network logon procedures.
Outlines the steps to perform before using the DPT unit.
Introduces the TSS and its functions like charging and configuration.
Describes the TSS physical attributes, dimensions, weight, and controls.
Explains the LED indicators for battery charging status on the TSS.
Explains the LED indicators for Built-In Test (BIT) status on the TSS.
Details how to set the channel for TPTs using the TSS.
Outlines the steps to perform before using the TSS unit.
Provides detailed technical specifications for TPT and DPT units.
Provides detailed technical specifications for the TAP unit.
Provides detailed technical specifications for the TSS unit.
Details the pinouts and specifications for TAP audio and data connectors.
Describes the 4-pole NEXUS receptacle for TPT headset and power/data modes.
Details the power input connector and TPT plug-in bracket connector for TSS.
Covers DPT headset interface and external audio/data interface connectors.
