Teletek electronics ECLIPSE 32 - Creating and Changing User codes; Deleting User codes; Memory LOG review by Manager

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
27
TIME
ADDRESS
0051
OPERATION
051
TEXT MENU
2. SETTINGS – 12. TIME
Setting the built-in clock
The engineer sets at this address the current time (HH:MM).
Default setting: [00:00]
DATE
ADDRESS
0052
OPERATION
052
TEXT MENU
2. SETTINGS – 13. DATE
Setting the system date
The engineer sets at this address the current date (DD/MM/YY).
Default setting: [01/01/12]
MENU STYLE
ADDRESS
0097
OPERATION
097
TEXT MENU
2. SETTINGS – 14. MENU STYLE
Programming Menu Style
The engineer sets the programming menu style at this address. Choose the number of the menu
style according your preference, as:
1
Programming with 4-digit address menus. In LCD keyboards with the 4-digit address is
available also and a short text description. This programming menu style is available in
operation with all keyboard models.
2
Programming with 3-digit operation menus. In LCD keyboards with the 3-digit address is
available also and a short text description. This programming menu style is available in
operation with all keyboard models.
3
Programming with text menus. The text menus are available as tree-structure. This menu
programming style is available only in operation with LCD клавиатури.
If you choose to operate with text menus, they will be available only with LCD keyboards in the
system, while the engineer programming via the LED keyboards in the system will the available with
4-digit address menus.
Default setting: [3]
SW
REVISION
ADDRESS
0098
OPERATION
098
TEXT MENU
1. MAINTENANCE – 5. SW REVISION
The engineer can review the current software revision of the control panel at this address.