Teletek electronics iRIS8 - Page 32

iRIS8 - Addressable Fire Alarm Panel – User & Maintenance Manual
32
APPENDIX B
Table: SensoIRIS series – names and description of supported devices.
Device System Name
Description
Isolator Module Available
SensoIRIS S130
Optical-smoke detector
No
SensoIRIS S130 IS
Optical-smoke detector
Yes (built-in)
SensoIRIS T110
Temperature detector
No
SensoIRIS T110 IS
Temperature detector
Yes (built-in)
SensoIRIS M140
Combined detector
No
SensoIRIS M140 IS
Combined detector
Yes (built-in)
SensoIRIS MCP150
Manual call point
Yes (must be connected during installation)
SensoIRIS WSOU
Sounder
No
SensoIRIS WSOU IS
Sounder
Yes (built-in)
SensoIRIS WSST / WS
Sounder and strobe
No
SensoIRIS WSST IS / WS IS
Sounder and strobe
Yes (built-in)
SensoIRIS BSOU
Base with sounder
No
SensoIRIS BSOU IS
Base with sounder
Yes (built-in)
SensoIRIS BSST
Base with sounder and strobe
No
SensoIRIS BSST IS
Base with sounder and strobe
Yes (built-in)
SensoIRIS MIO 04
Module with 4 outputs
Yes (must be connected during installation)
SensoIRIS MIO 40
Module with 4 inputs
Yes (must be connected during installation)
SensoIRIS MIO 22
Module with 2 inputs/2 outputs
Yes (must be connected during installation)
SensoIRIS MIO 22M
Module with 2 inputs/2 monitored outputs
Yes (must be connected during installation)
SensoIRIS MOUT
Module with 1 output
Yes (must be connected during installation)
SensoIRIS MOUT-240
Module 240V interface with 1 output
Yes (must be connected during installation)
SensoIRIS MINP M
Mini module with 1 monitored input
No
SensoIRIS MC-Z
Conventional zone module
Yes (must be connected during installation)
SensoIRIS MIMIC
Module with 32 LED outputs
Yes (must be connected during installation)