Need help?Do you have a question about the TELEVAC MM200 and is the answer not in the manual?
General| Brand | TELEVAC |
|---|---|
| Model | MM200 |
| Category | Controller |
| Language | English |
Details the MM200 controller's electronic unit, modular sensor interface, and standard features.
Describes various sensor types including diaphragm, thermocouple, cold cathode, hot cathode, and capacitance diaphragm gauges.
Steps for unpacking, inspecting, and verifying the instrument's initial state before installation.
Covers module configuration, line voltage selection, and controller installation methods.
Guides users through instrument initialization, pushbutton functions, and module-specific setups.
Explains front panel display definitions, error indications, and keypad functions for operation.
Details relay setpoint configuration, range of use, and analog 0-10V output options.
Instructions for connecting and communicating via RS232/RS485 using Hyper Terminal and command protocols.
Comprehensive list and description of commands for controlling the instrument via serial interface.
Covers electrical verification and vacuum calibration using simulators and master gauges.
Lists environmental, power, and operational specifications for the controller unit.
Provides preliminary troubleshooting steps and guidance for setting up various instrument modules.
To Next Page