INSTRUMENT MANUAL
VACUUM GAUGE MODEL MM200
160Phone:(215) 947-2500 fax:(215) 947-7464 e-mail:sales@televac.com web site:www.televac.com
MM-200_im REV M
Page 144 of 160
Finally, there are jumpers placed in the 10V position of J3. This provides a 0 to 10VDC analog
“0-10V " output. The alternate is a 0 to 10 mV output. This is not recommended unless your recorder cannot
handle 10V.
Labels are placed on the rear panel to show the station names assigned.
Fig. 9.3d – Dual 4A Convection Gauge Module Details
To Next Page
Loading...