EasyManuals Logo

Telit Wireless Solutions HE910 User Manual

Telit Wireless Solutions HE910
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
HE910 Hardware User Guide
1VV0300925 Rev. 32 Page 105 of 111 2019-11-25
16. SAFETY RECOMMANDATIONS
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment required.
The use of this product may be dangerous and has to be avoided in the following areas:
Where it can interfere with other electronic devices in environments such as
hospitals, airports, aircrafts, etc
Where there is risk of explosion such as gasoline stations, oil refineries, etc
It is responsibility of the user to enforce the country regulation and the specific
environment regulation.
Do not disassemble the product; any mark of tampering will compromise the warranty
validity.
We recommend following the instructions of the hardware user guides for a correct wiring
of the product. The product has to be supplied with a stabilized voltage source and the
wiring has to be conforming to the security and fire prevention regulations.
The product has to be handled with care, avoiding any contact with the pins because
electrostatic discharges may damage the product itself. Same cautions have to be taken
for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM
when the product is in power saving mode.
The system integrator is responsible of the functioning of the final product; therefore, care
has to be taken to the external components of the module, as well as of any project or
installation issue, because the risk of disturbing the GSM network or external devices or
having impact on the security. Should there be any doubt, please refer to the technical
documentation and the regulations in force. Every module has to be equipped with a
proper antenna with specific characteristics. The antenna has to be installed with care in
order to avoid any interference with other electronic devices and has to guarantee a
minimum distance from the body (20 cm). In case of this requirement cannot be satisfied,
the system integrator has to assess the final product against the SAR regulation.
The European Community provides some Directives for the radio equipment introduced
on the market. All the relevant information’s are available on the European Community
website:
https://ec.europa.eu/growth/single-market/european-standards/harmonised-
standards/rtte_en
The text of the Directive 2014/53/EU regarding radio equipment is available at:
http://eur-lex.europa.eu/legal-
content/EN/TXT/?qid=1429097565265&uri=CELEX:32014L0053

Table of Contents

Other manuals for Telit Wireless Solutions HE910

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telit Wireless Solutions HE910 and is the answer not in the manual?

Telit Wireless Solutions HE910 Specifications

General IconGeneral
BrandTelit Wireless Solutions
ModelHE910
CategoryControl Unit
LanguageEnglish

Related product manuals