Telit Wireless Solutions HE910 - HE910 Document History

HE910 Hardware User Guide
1VV0300925 Rev. 32 Page 109 of 111 2019-11-25
17. DOCUMENT HISTORY
Revision
Date
Changes
0
2011-03-31
Preliminary Version
1
2011-05-19
Updated pinout on UART1
2
2011-05-25
Update chapter 13
3
2011-07-25
Added DVI app note references; chapter 4.1
4
2011-07-29
Updated audio, on_off/reset and digital sections
5
2011-10-18
Added STAT_LED info, Updated SPI pinout
Pads A8, A9, D14, A14 now reserved
Power supply extended to 3.3 V
par 4.3 renamed as “unconditional shutdown”
6
2011-12-22
USIF0 USIF1 names added to Main and AUX
serial ports
Updated IO logic levels
Updated module’s mechanical drawing
IO levels selection 1.8/1.2 removed (now only
1.8)
7
2012-01-16
Added HE910-GA and –D; added Conformity
assessment chapter
8
2012-02-03
Chapter 5.1 updated
9
2012-02-07
Chapter 4.2 updated
10
2012-03-16
Added ADC in pinout description; added GPS
specification; updated Chapter 13 and 14;
11
2012-03-26
Chapter 2.1, 2.1.2, 3.3, 5.4, 14.9
12
2012-03-27
Added HE910-EU and NA products
13
2012-03-28
Updated paragraph 14.9
14
2012-05-08
Added EUR, EUD, NAR, NAD variants; added
Sensitivity and TX Power Class specifications.
Updated par 14.7.1 and 14.3
15
2012-05-30
Updated Chapter 16.2; 7.3.8
16
2012-06-06
Pin R13 renamed as HW_SHUTDOWN*, Pin
P11 renamed