Telit Wireless Solutions LN940A9 SERIES User Manual

80591ST10886A Rev.2 Page 22 of 200 2018-07-02
Parameter Description
parameter
Value
Instruction
<value> [0]
CONNECT result code returned. Dial tone and busy detection
are disabled.
1 CONNECT <text> result code returned. Dial tone and busy
detection are disabled.
2
CONNECT <text> result code returned. Dial tone detection is
enabled, busy detection is disabled.
3 CONNECT <text> result code returned. Dial tone detection is
disabled, busy detection is enabled.
4 CONNECT <text> result code returned. Dial tone and busy
detection are both enabled.
4.8. AT&W Store AT Command Setting to User Defined Profile
AT&W stores the current AT command settings to a user defined profile in non-volatile memory of device. The
AT command settings will automatically be restored from the user defined profile during power-up or if ATZ is
used. AT&F restores AT command factory default settings. Hence, until first use of AT&W, ATZ works as
AT&F.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT&W[<value>] OK -
Parameter Description
parameter
Value
Instruction
<value> [0] User Profile Number
4.9. AT&E Store AT Command Setting to User Defined Profile
Controls the display of data rate to be either serial rate or wireless connection speed.

Telit Wireless Solutions LN940A9 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A9 SERIES
Category	Control Unit
Language	English