Telit Wireless Solutions LN940A9 SERIES User Manual

80591ST10886A Rev.2 Page 51 of 200 2018-07-02
Type
Command
Possible Return Result
Instruction
Write Command AT+CEAP =<dfname>,
<EAPMethod>,
<EAP packet data>
[,<Dfeap>]
+CEAP: <EAPsessionid>,<EAP
parameter response>
OK
-
Parameter Description
parameter
Value
Instruction
<dfname> XXX
<dfname>: string type in hexadecimal character format.
All selectable applications are represented in the UICC
by an AID coded on 1 to 16 bytes.
<EAPMethod> XXX
String type in hexadecimal character format. This is the
EAP Method Type as defined in RFC 3748 [68] in 1 byte
format or 8 bytes expanded format. The value range for 1
byte format and for 8 bytes expanded format is defined in
RFC 3748 [68].
<EAP packet data> XXX
<EAP packet data>: string type in hexadecimal character
format. This is the EAP packet data in hexadecimal
character as defined in ETSI TS 102 310 [66].
<Dfeap> XXX
<Dfeap>: string type in hexadecimal character format.
Contains the DF(EAP) associated with the specified
<EAPMethod> on the SIM/UICC as defined in ETSI TS
102 310 [66] (e.g. “6D34”).
<EAPsessionid> 1-4294967295
Integer type. This is the identifier of the EAP session to
be used in order to retrieve the EAP parameters with
EAP Retreive Parameters +CERP command. Value
range is from 1 to 4294967295.
<EAP parameter response> XXX
String type in hexadecimal character format. Defined in
ETSI TS 102 310 [66].
6.15. AT+CERP EAP Retrieve Parameters

Telit Wireless Solutions LN940A9 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A9 SERIES
Category	Control Unit
Language	English