80591ST10886A Rev.2 Page 42 of 200 2018-07-02
at+crlp?
+CRLP: 61,61,48,6,0
+CRLP: 61,61,48,6,1
+CRLP: 240,240,52,6,2
OK
at+crlp=?
+CRLP: (0-61),(0-61),(38-255),(1-255),0
+CRLP: (0-61),(0-61),(38-255),(1-255),1
+CRLP: (0-488),(0-488),(42-255),(1-255),2
OK
at+crlp=60,60,48,6,1
OK
at+crlp?
+CRLP: 61,61,48,6,0
+CRLP: 60,60,48,6,1
+CRLP: 240,240,52,6,2
OK
6.6.
AT+CR Service Reporting Control
AT+CR configures the AHS3-W whether or not to transmit an intermediate result code +CR: <serv> to the TE
when a call is being set up. <mode>=1 may lead to connection failure, if the application waits for default result
code/URC.
Syntax
Test Command AT+CR=? +CR: <mode> list
OK
-
To Next Page
Loading...
Need help?
General
