Telit Wireless Solutions LN940A9 SERIES User Manual

80591ST10886A Rev.2 Page 37 of 200 2018-07-02
6. UMTS CALL CONTROL COMMANDS
6.1. AT+WS46 Select Wireless Network
This command may be used when TA is asked to indicate the networks in which it can operate..
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+WS46=? + WS46: (<n> value list)
OK
-
Read Command AT+ WS46? + WS46: <n>
OK
-
Write Command AT+ WS46=<n> OK -
Parameter Description
parameter
Value
Instruction
<n> 12
GSM Digital Cellular Systems (GERAN only)
22 UTRAN only
25 3GPP Systems (both GERAN and UTRAN)
28 LTE
29 LTE
6.2. AT+CSTA Select Type of Address
This set command selects the type of number for further dialing commands ATD according to 3GPP Technical
Specifications. Test command returns values supported a compound value.
Syntax
Type
Command
Possible Return Result
Instruction

Telit Wireless Solutions LN940A9 SERIES Specifications

General

Brand	Telit Wireless Solutions
Model	LN940A9 SERIES
Category	Control Unit
Language	English