WE866C3-P Linux Companion RF Test User Guide
1VV0301640 Rev. 0 Page 8 of 28 2019-12-09
1. INTRODUCTION
Scope
This document provides an overview about the WE866C3 RF test procedure on a Linux Machine.
Audience
This document is intended only for Telit customers who want to set up their application using
WE866C3 Linux module.
Contact Information, Support
For general contact, technical support services, technical questions and report
documentation errors contact Telit Technical Support at:
• TS-EMEA@telit.com
• TS-AMERICAS@telit.com
• TS-APAC@telit.com
• TS-SRD@telit.com
Alternatively, use:
https://www.telit.com/contact-us
For detailed information about where you can buy the Telit modules or for recommendations
on accessories and components visit:
http://www.telit.com
Our aim is to make this guide as helpful as possible. Keep us informed of your comments
and suggestions for improvements.
Telit appreciates feedback from the users of our information.
To Next Page
Loading...
