Telit Wireless Solutions WE866E4-P User Manual

WE866E4-P Module Hardware User Guide
1VV0301487 Rev. 1.2 18 2018-07-27
PRELIMINAR
Y
4.3 General Design Rules
It is recommended to provide a 10μF capacitors right next to the VDD_WLAN and BT
pins, and 2.2μF at each of the other power supply pins like VIO.
DTIM=1 TBD mA
DTIM=3 TBD μA
DTIM=10 TBD μA
Table 4 Power Consumption
Power Consumption Typical

Telit Wireless Solutions WE866E4-P Specifications

General

Brand	Telit Wireless Solutions
Model	WE866E4-P
Category	Network Card
Language	English