EcoInsight I, O & M Guide
Telkonet, Inc.
For Use with Firmware Version 2.x
20800 Swenson Drive, Suite 175
Association Examples
Waukesha, WI 53186
Revision 4.2
(414) 302-2299
Page 29
www.telkonet.com
EcoInsight Association Example#1:
multiple sensors controlling one
thermostat; used in hotel suites,
apartments, etc.
EcoInsight Association Example #2:
One sensor controlling multiple
thermostats; used in small classroom
environments, etc.
EcoInsight Association Example #3:
Multiple sensors controlling multiple
thermostats; used in dormitory suites
(one common room and 2+ bedrooms),
larger classrooms, offices, or common-
area applications, etc.
If the EcoInsight loses association to any
one of its sensors, either the on-board PIR
sensor or the external EcoView or
EcoContact, the thermostat will
immediately revert to Occupied mode. This
is done to ensure that sensor association
loss does not affect the comfort of the
room occupant. Any setpoint limits (e.g.
max/min allowed temperatures) that have
been assigned to the thermostat remain in
force.