Telkonet Ecosmart EcoInsight - Association Examples; Bind Types; Configurations

EcoInsight I, O & M Guide Telkonet, Inc.
For Use with Firmware Version 2.x 20800 Swenson Drive, Suite 175
Association Examples Waukesha, WI 53186
Revision 4.2 (414) 302-2299
Page 28 www.telkonet.com
Association Examples
“Associating” the devices is part of the installation process. Associating devices can be done on the
physical devices themselves (see the EcoSmart Firmware 2.x Device Association Guide for
instructions), or via the EcoSmart Serial Utility (see the ESU Operation & Maintenance Guide for
instructions).
The EcoInsight can accept association with up to 8 total EcoView Occupancy Sensors or EcoContact Door
Sensors. The EcoView, EcoContact, EcoGuard and EcoSwitch may be associated to more than one EcoInsight.
Bind Types
There are 4 Bind Types. They are:
 00 = stand alone
 01 = master
 02 = slave
 03 = RTR Occ only (exclusive to EcoInsight.
Configurations
The EcoInsight is available in three possible configurations:
1. Standalone
2. Networked via Ethernet
3. Networked via ZigBee
These abilities allow unique configurations of thermostat/sensor pairing. The following are three EcoInsight
association examples.