Commission EcoTouch+
EcoTouch+ IO&M Guide
Telkonet, Inc.
For Use with Firmware Version 2.x
20800 Swenson Drive, Suite 175
Commission EcoTouch+
Waukesha, WI 53186
Revision 5
(414) 302-2299
Page 17
www.telkonet.com
Commission EcoTouch+
What is “Commissioning”?
A generic definition of “commissioning” is to bring a
new product into working condition.
“Commission” the EcoSmart thermostat to do 2 things:
1. Scan the room while the room is empty so it
recognizes even the smallest “movement”
(like flowing air from a fan, and even radio
waves) when the room is unoccupied.
2. Test the HVAC system functionality. If there’s
an HVAC problem, the thermostat will display
a message so you can fix it right away.
You simply complete the process described on below;
the thermostat does the work.
Continued on next page.
1) 3-finger tap* anywhere on screen.
*i.e. touch screen using 3 fingers,
simultaneously; slightly spread out your
fingers so all three fingers are recognized
by screen.
2) Config
Back
Standard feature for all codes going
forward from this point:
•EcoSource+: 3.2.2.0 or greater
•EcoTouch+: 4.0.27.0 or greater (3-
finger-touch the screen for EcoTouch+
version#)
To Next Page
Loading...
