EcoTouch+ Configuration Changes
EcoTouch+ IO&M Guide
Telkonet, Inc.
For Use with Firmware Version 2.x
20800 Swenson Drive, Suite 175
Appendix AEcoTouch+ Configuration Changes
Waukesha, WI 53186
Revision 5
(414) 302-2299
Page 23 www.telkonet.com
EcoTouch+ Configuration Changes
Change Channel
1. On the EcoTouch+, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Press the Config button.
4. Enter the password C57A
5. Touch Enter.
6. Touch Reconnect
7. Touch Search
8. When “Success” message appears, press Exit, press Exit on the next screen and Exit on the third
screen.
Activate “Display Mode” Option
1. On the EcoTouch+, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Press the Config button.
4. Enter the password C57A
5. Touch Enter
6. Touch Display/Config
7. Enable Demo Mode field: touch the pencil icon to select “Y” or “N”
8. Display Style field: touch the pencil icon to select “Detailed” or “Minimal”
9. Touch Exit
FYI, touch the menu icon to toggle between Detailed and Minimal display modes.
System Status Screen
(Displays Firmware Version, MAC, EPID, Channel, Address, LQI and Paired status.)
1. On the EcoTouch+, “three-finger tap” anywhere on the screen.
2. The System Status screen appears.
3. Touch Exit when done.
To Next Page
Loading...
