EcoWave Package Overview
EcoTouch+ IO&M Guide
Telkonet, Inc.
For Use with Firmware Version 2.x
20800 Swenson Drive, Suite 175
The EcoSmart Energy Management System
Waukesha, WI 53186
Revision 5
(414) 302-2299
Page 2
www.telkonet.com
Overview: EcoWave Remote Thermostat/Controller Package
The EcoWave package is comprised of two hardware components as shown below. Together they form a
wireless programmable controllable thermostat. It can be easily installed on packaged terminal air
conditioners, fan coils, heat pumps, split systems, and more. With software-based relay control and fan speed
configuration, programming setup is simple and fast.
EcoTouch+
Display unit
Place in optimum location for temperature measurement and
ease of occupant use
EcoSource+
HVAC Controller
Install in or on HVAC unit
Accepts association with 15 total compatible wireless devices
Each compatible wireless device can be associated to
multiple EcoSource+ devices.
Accomodates a Variety of Configurations
The EcoWave Package can be configured for many different HVAC
scenarios. For example:
One EcoTouch+ can control multiple HVAC systems, each
equipped with an EcoSource+, but all directed by a single
EcoTouch+ display unit. This type of installation reduces the
complexity of running multiple HVAC units in a single large space
and eliminating the potential of opposing modes forcing
equipment to compete against each other.
To Next Page
Loading...
