Chapter 3
| 7
User Operation
3 User Operation
Talent and Producer Modes
Because the VSet Desktop Controller is meant to be the board operator’s interface, the controller is permanently set to Talent
Mode. This means that all lines selected from the line columns will be sent to the corresponding hybrid and that there is no
means for screening calls in Producer mode like on the VSet6 or VSet12 phone-sets.
With the VSet6 and VSet12, certain functions work differently in “Talent” versus “Producer” mode. Therefore, it is important
that your staff understand the difference between these two modes and that the VSet Desktop Controller is Talent Mode
ONLY!
Line Status Display
On the Home Screen, each phone line has a portion of the display that shows symbols and info about the line such as status and
Caller ID:
The Line is ready for incoming or outgoing calls
The Line is Ringing
The Line is On Fader 1
The Line is On Fader 2
The Line is Locked on Fader 1
To Next Page
Loading...