Chapter 5
| 19
Web Graphical User Interface
User Password
Here is where you will enter and confirm a new password for the web GUI. The default is no password, blank. So if a new
password is created, you must remember it, or else you will not be able to log back into the GUI.
If the password is changed and forgotten, it can be reset to blank by resetting the VSet to factory defaults. To do this navigate to
Menu / Setup / Reset to Factory.
Syslog Server Conguration
The VSet will communicate to a network logging system or a Syslog. If your studio network has a Syslog server and you want
the VSet to appear in the logs, enter its IP address here.
To Next Page
Loading...