Teltonika FMC640 - Configurator Functionality

Quick Manual v2.2 // FMC640
9
Downloaded Congurator will be in compressed archive.
Extract it and launch Congurator.exe. After launch software
language can be changed by clicking 🌐 in the right bottom
corner.
Conguration process begins by pressing on connected device.
FMC640
Various Status window
1
tabs display information about GNSS
2
,
GSM
3
, I/O
4
, Maintenance
5
and etc. FMC640 has one user
editable prole, which can be loaded and saved to the device.
After any modication of conguration the changes need to
be saved to device using Save to device button. Main buttons
oer following functionality:
 Load from device – loads conguration from device.
 Save to device – saves conguration to device.
 Load from le – loads conguration from le.
 Save to le – saves conguration to le.
 Update rmware – updates rmware on device.
 Read records – reads records from the device.
 Reboot device – restarts device.
 Reset conguration – sets device conguration to
default.
Most important congurator section is GPRS – where all
your server and GPRS settings
6
can be congured and Data
Acquisition
7
– where data acquiring parameters can be
congured. More details about FMC640 conguration using
Congurator can be found in our Wiki
8
.
After connection to Congurator Status window will be
displayed.
FMC640
1
wiki.teltonika-gps.com/view/FMC640_Status_info
2
wiki.teltonika-gps.com/view/FMC640_Status_info#GNSS_Info
3
wiki.teltonika-gps.com/view/FMC6401_Status_info#GSM_Info
4
wiki.teltonika-gps.com/view/FMC640_Status_info#I.2FO_Info
5
wiki.teltonika-gps.com/view/FMC640_Status_info#Maintenance
6
wiki.teltonika-gps.com/index.php?title=FMC640_GPRS_settings
7
wiki.teltonika-gps.com/index.php?title=FMC640_Data_acquisition_
settings
8
wiki.teltonika-gps.com/index.php?title=FMC640_Conguration