https://wiki.teltonika-gps.com/view/FMC920_First_Start
FMC920 First Start
Main Page > Basic Trackers > FMC920 > FMC920 First Start
Small and smart tracker with Bluetooth and internal backup battery
Contents
1 How to insert Micro-SIM card
2 Pinout
2.1 Configuration (Windows)
3 Quick start guide
4 Mounting recommendations
5 Installation photos
6 Safety information
6.1 Precautions
How to insert Micro-SIM card
Gently remove FMC920 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Remove the adhesive tape protection.3.
Place the battery inside the casing of the FMC920. Make sure the adhesive tape sticks to the4.
casing.
Connect the internal battery to the FMC920 PCB.5.
Attach device cover back. Device is ready to be connected.6.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and internal battery disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.
To Next Page
Need help?
General