13
Enter the default password, which is “admin01” into the “Password” field and then either click Login with your mouse or
press the Enter key. You have now successfully logged into the router and should see the Status page.
From here on out you can configure almost any aspect of your router.
Operation Modes
The RUT500 router supports various operation modes. It can be connected to the internet (WAN) via 3G, standard
Ethernet cable or via a wireless network. If you connect to the internet via an Ethernet cable of Wi-Fi, you may also
backup your connection with 3G for added stability. On every case except when you connect to the internet via Wi-Fi,
you can distribute your internet via an Ethernet cable (3 ports) and/or a wireless network. When you connect via Wi-Fi,
you cannot have Wi-Fi in your LAN.
In later sections it will be explained, bit by bit, how to configure your router to work in a desired mode.
To Next Page
Loading...
Need help?
General
