TemperZone TZT-100 - General; Introduction; Design

Page 4 of 24
Heat Pump Water Heaters
MWP Series
Introduction
Magnus
®
hot water heat pumps by Temperzone provide ideal
heating solutions as we move to a sustainable future using
cleaner energy sources.
Magnus Series heat pumps utilize the highest efciency
technologies to minimise energy consumption and are not
dependent on combustion of fossil fuels. They can deliver up to
6 times the heating energy output for every unit of electrical
energy consumed.
Magnus
®
MWP Series heat pump units are specically designed
to deliver heated water to swimming pool applications only (not
Spa pools).
The Thermoshell
®
is designed to operate direct in-line with high
ow pool pumps, have low pressure drop and a low temperature
difference of nominal 3 degree temperature difference across
the heat exchanger.
Magnus
®
MWP Series heat pumps incorporate the proprietary
UC8 unit control module with sophisticated software installed
specic to the application of pool heating.
Typical applications include:
• Civic swimming pools
• Retirement homes
• Leisure centres
• Water parks
• Hotels and resorts
General
MAGNUS MWP, delivering
600
% heating efficiency
*
Heat pump water heaters are the most efcient way to heat a pool. MAGNUS pool heaters
are able to turn one unit of input power into as much as 6 units of output power. The 600%*
efciency compares well with 100% for electric resistance heaters, and 70-90% for gas
systems. The very low cost of operation means MAGNUS heat pump systems are the most
cost effective option for your pool.
5 kW free heat
energy from
environment
1 kW electrical
power input
6 kW heat
energy output
Comparative energy input and output for various pool heating technologies at typical operating conditions*.
MAGNUS Heat Pump
Electric Heater
Gas Heating
input
output
input
output
input
output
Comparing Energy Eciency
* conditions: 27/20°C db/wb outdoor ambient; EWT 27°C; LWT 30°C.
04
Figure 1