INSTRUCTION MANUAL
IMPORTANT: If the appliance is not level, then the door and door seal may be
a ected.
IMPORTANT: Do not move the appliance when the feet are adjusted high.
Installing The Handle
●
Remove the door Gasket slightly to expose the two screw holes.
●
Fix the Handle by screwing the two Handle Screws tightly, the Handle Screws with
Washers are pre-installed inside the screw holes, pls.do not unscrew the Handle
Screws too much in case the Washers fell o .
●
Replace the Gasket.
LOCK & UNLOCK THE DOOR (FOR OPTION)
●
Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
●
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING THE WINE COOLER
WORKING CLIMATE
•
The appliance is designed for operating from SN to N climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Climate Class Ambient Temperature
SN 10 - 32 °C (50
ºF-90ºF)
N 16 - 32 °C (61
ºF-90ºF)
ST 16 - 38 °C (61
ºF-100ºF)
T 16 - 43 °C (61
ºF-109ºF)
To Next Page
Loading...