Temptech 56L - Selecting Fahrenheit(ºf) & Celsius (ºC) Display


INSTRUCTION MANUAL
For Dual Zone
•
The default temperature setting ranges are E: 5-12
ºC
(41-54
ºF
) for the upper zone
and 12-22
ºC
(54-72
ºF
) for the bottom zone.
•
You need to select the set zone by touching the mark before touching the mark
or to set the desired temperature. The zone temperature will ash when it is
ready to be set.
•
The rst touch on mark or will recall the previous set temperature displayed
in the digital window.
•
Touch the mark to increase the set temperature by 1
ºC (or by 1ºF)
. On the
contrary, touch the mark to decrease the set temperature by 1
ºC (or by 1ºF).
For Triple Zone
•
The temperature setting of upper zone is same as Single Zone above;
•
The temperature setting of Mid Zone and Lower Zone is same as Dual Zone above.

SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks with 2 ngers at the same time and hold for 5 seconds, you
can interchange the Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark , you can interchange the Fahrenheit and Celsius display
for both zones at the same time.
* For models of 116L, the Celsius and Fahrenheit of Left and Right Zone will be changed at
the same time no matter the operation above on Left or Right Zone.
For Triple Zone
•
The ºC/ºF shifting of upper zone is same as Single Zone above;
•
The ºC/ºF shifting of Mid Zone and Lower Zone is same as Dual Zone above.