Temptech 56L - Temperature Setting (In Cabinet)


INSTRUCTION MANUAL
Display Temp.Range (Single Zone)
E (Default) 5 - 22 °C (41
ºF-72ºF)
F 2 - 20 °C (36
ºF-68ºF)
H 10 - 19 °C (50
ºF-66ºF)
L 0 - 20 °C (36
ºF-68ºF)
* For models of 116L, the defualt temperature setting range is: 5-22 ºC (41-72 ºF) for Left
Zone, 2 - 22 °C (36ºF-72ºF) for Right Zone.
For Dual Zone
•
The default temperature setting ranges are E: 5-12
ºC
(41-54
ºF
) for the upper zone
and 12-22
ºC
(54-72
ºF
) for the bottom zone.
•
To set a temperature range as desired, pls.make sure the control panel is under locked
condition.
•
Press the mark for 3 seconds, the display windows will ash "E"--"F"--"H"--"L" in
loop with a sound of beep by every pressing.
•
Leave the display windows ashing for 3 seconds with a sound of beep to conrm
the setting.
Display
Temp.Range (Dual Zone)
Upper Zone Lower Zone
E (Default) 5 - 12 °C (41
ºF-54ºF)
12 - 22 °C (54
ºF-72ºF)
F 2 - 12 °C (36
ºF-54ºF)
12 - 20 °C (54
ºF-68ºF)
H 5 - 12°C (41
ºF-54ºF)
8 - 19 °C (46
ºF-66ºF)
L 2 - 10 °C (36
ºF-50ºF)
12 - 22 °C (54
ºF-72ºF)
For Triple Zone
•
The temperature setting range of upper zone is same as Single Zone above;
•
The temperature setting range of Mid Zone and Lower Zone is same as Dual Zone
above.

TEMPERATURE SETTING
For Single Zone
•
The default temperature setting range is E: 5-22
ºC
(41-72
ºF
).
•
Directly touch the or mark to set the wine cooler temperature as you want.
•
The rst touch on or mark will recall the previous set temperature displayed.
•
Touch the mark to increase the set temperature by 1
ºC (or by 1ºF)
. On the
contrary, touch the mark to decrease the set temperature by 1
ºC (or by 1ºF)
.