Need help?Do you have a question about the TEMPUR ZERO-G 400DS and is the answer not in the manual?
General| Massage | Yes |
|---|---|
| Wireless Remote | Yes |
| Adjustable Legs | Yes |
| Head Tilt | Yes |
| Wallhugger | Yes |
| Heating Function | Yes |
| Remote Control | Yes |
Ensures safe electrical connections, details warranty, and outlines product performance limits and weight capacity.
Advises on pacemaker interaction, child/pet safety, general safety features, noise, and fabric care.
Lists all parts and advises verification before discarding packaging materials.
Specifies that electronic components are housed in boxes under the base or attached to the frame.
Provides a diagram identifying key components labeled A through F on the base.
Details the functions of head/foot massage units and their associated motors.
Explains the functions of the Power Down Box and Control Box.
Illustrates component connections and emphasizes reading all instructions before installation.
Provides quick reference for massage, power, and multifunction settings (1-7).
Quick reference for reset operations and timer functions (1-7).
Details the functions of the Control Box (A) and Power Down Box (B).
Explains power supply (D), input cords (C), and motor connection ports (F).
Emphasizes using two people for setup and instructions for box placement and material removal.
Instructions for removing the base from packaging and installing headboard brackets.
Detailed steps for correctly installing the base legs, including washer placement.
Guides on synchronizing two bases and installing batteries in the Power Down Box.
Instructions for connecting power cords and sync cables to control boxes.
Connects the power supply and advises on proper cord routing.
Instructions for safely flipping and positioning the base onto its legs.
Plugs the base into power and verifies correct setup and battery installation.
Installs the mattress retainer bar and confirms basic setup completion.
Explains the indicator lights for massage timer settings (10, 20, 30 minutes).
Details controls for head/foot massage, relax presets, and TV presets.
Covers lift/lower functions for head/foot and preset positions like Zero-G.
Explains how to activate massage and adjust intensity using specific buttons.
Details operation of the Timer/All Off button and associated light behavior.
Instructions on using arrow buttons to adjust the head and foot sections.
Explains how to use one-touch buttons for Zero-G, Flat, TV, and Relax positions.
Notes that headboard brackets are optional and lists required components.
Lists required tools, the mounting plate, and specific bolts/nuts for installation.
Details attaching the mounting plate and positioning the base legs.
Instructions for aligning and securing headboard brackets to the base.
States the box is for emergency use and explains its function during power outages.
Instructions for locating the Power Down Box and its battery requirements.
Steps for flattening the base using the button and removing batteries post-emergency.
Confirms initial pairing and provides steps if re-pairing is needed.
Details the double-click method for pairing and the indicator lights used.
Describes an alternative pairing method and confirms successful pairing.
Information on connecting straps and the SmartSync™ cable for base synchronization.
Guidance on using plastic connecting straps to secure two bases together.
Steps for loosening legs, attaching straps, and securing them.
Instructions for re-tightening legs and repeating strap attachment on the other end.
Connects sync cords to control boxes and Power Down boxes.
Disconnects power and sync cables, then reconnects sync cords.
Connects power boxes for synchronization and checks cord security.
To Next Page