Temsa TS 45 - Page 34

34|TS 45
02 VEHICLE
INFORMATION
Rev. 00 / 10.02.14
2.3.1 Left Control Panel
Engine Brake Level
Switch
Switchhasthreelev-
els. Press button to
adjustenginebrake
level.
INFORMATION
1st Position: Provides maxi-
mumenginebrakepower.
2nd Position: Provides less
than1stpositionenginebrake
power.
3rd Position: Provides mini-
mumenginebrakepower.
Cruise Control
Adjust Switch
Increasesordecreas-
es stabilized speed
value.
Cruise Control
Switch
Activates cruise
controlfunction.So
the“cruisecontrol
level”switchcanbe
used.
Cruise Control
Enablesconstantspeed(depending
ontheengineandbrakingpower)
withoutpressingacceleratorpedal.
Cruise Control Activating
Pressupperorlowersideofcruise
control level switch to activate
cruisecontrol.
Accelerating or Deceleration
Pressuppersideofcruisecontrol
level switch to accelerate; press
lowersideoftheswitchtodecel-
erate.
Deactivating
Presslower sideofcruise control
switchtodeactivate.
INFORMATION
Cruisecontrolisdeactivated
whenservicebrakeisapplied
orenginebrakeisactivated.
INFORMATION
• Pressuppersideof“cruise
control switch” to acti-
vate “cruise control level
switch”.
• Cruisecontrolcanbeacti-
vatedwithinspeedrangeof
20mph(32km/h)and75
mph(120km/h).
• Move your foot from the
accelerator pedal before
pressing cruise control
switch.
WARNING
• When cruise control func-
tionisdeactivated,vehicle
slowsdownunlessaccelera-
torpedalispressed.
• Never use cruise control
onwintryroadconditions,
slippery roads or in heavy
trafc.
• When the ignition is
switched off cruise values
aredeleted.
Intarder Foot
Control Disable
Switch
Enablesthecontrol
of auxiliary brake
unit (retarder) via
footpedal.
Lift Active Switch
(Optional)
Press upper side of
the switch to acti-
vateliftmechanism.
See page 80 for
more information
aboutliftmechanism.