Rev. 00 / 10.02.14
Removing the Propeller Shaft
1.
Remove the propeller shaft,
transmission connection nuts,
then remove the propeller shaft
from the transmission.
2.
Remove the rear axle and shaft
connection bolts and separate
the shaft from the rear axle
WARNING
Parking brake can be locked
when air pressure in the sys-
tem is insufcient.
If parking brake is locked,
please follow instructions on
page 164.
Ensure the parking brake sys-
tem function again before
towing.
WARNING
After removal of the propeller
shaft, place gearbox in a neu-
tral position.
4.3.1 Towing the Vehicle
To Next Page
Loading...
