Rev. 00 / 10.02.14
4.1.5 Checking
Control Switches
Check that all control switches func-
tion properly before driving.
WARNING
DO NOT OPERATE THE BUS
WITH AN AIR PRESSURE
BELOW 100 PSI
4.1.6 Checking Indicator
and Warning Lamps
Indicator and warning lights pro-
vide all the information about the
operations of the vehicle. It is of
vital importance to check all of the
indicator and warning lamps before
driving.
4.1.7 Checking Air
Pressure
Check that air pressure is enough
to operate brake and other systems.
INFORMATION
All control switches
function after main cir-
cuit breaker is switched
on. Consult authorized
TEMSA Service if any of the
switches malfunction.
WARNING
Warning lamps may indicate
any malfunction during travel.
Always nd out the reasons
for the malfunction. Park the
vehicle in a convenient place
and consult authorized TEMSA
Service if you cannot detect or
repair the malfunction.
To Next Page
Loading...
