Rev. 00 / 10.02.14
3.6 Accessories
Rinsing Lavatory Waste Tank
WARNING
•
Never ll up water over
5,28 gal.
•
Only use clean water to
rinse the tank.
• Discharge and rinse the lav-
atory waste tank regularly.
1.
Ensure that discharge valve is
closed.
2.
Connect water supply to clean
water inlet (1).
3. Pull by-pass valve (3) upwards.
4.
Let the water passes from the
valve for three-ve minutes to
help remove solids left behind.
5.
Restore by-pass valve (3) to its
original position.
6.
Pull the discharge valve lever
down to empty the tank.
7.
Close the discharge valve and
repeat the same procedure for
three times.
8.
Disconnect the water supply
when rinsing is nished.
To Next Page
Loading...
