Ten-Tec Eagle 599 - 1.7. Configuration Menu

599 / Eagle Users manual Release 1.009 CE – April 15, 2015
Part #74447
Printed in USA 6
1.7. Configuration Menu
Upon purchase of your transceiver some
settings may have already been factory
installed and set into the Eagle. Optional
accessories such as an auto tuner, a specific
additional roofing filter, noise blanker, or
your favorite front display color combination
will need to be programmed into the Eagle.
When optional items are shipped with your
Eagle order, then these optional items will
already be configured at the factory in the
Configuration Menu.
To begin configuring the Eagle, start with the
Eagle powered off, press the FNC button, and
continue to hold the FNC button while
powering up the Eagle. When the Eagle is
first shipped from the factory, the front panel
display will show “F1 2.4” which indicates
the factory filter has been installed. Now
release the FNC button. To select a different
value for a given Configuration Menu item,
use the MULTI knob to scroll through the
choices. To advance to the next Configuration
Menu item, press the FNC button. Once the
settings in the Configuration Menu have been
set to the desired values, press any key on the
front panel except the FNC button to exit the
Configuration Menu.
The items contained in the Configuration
Menu and their options are shown in the
following table.
Item
Name
Settings
Notes:
F1
nO / none
15.0/15KHz
6.0 / 6KHz
2.4 /2.4KHz
1.8 /1.8KHz
0.6 / 600Hz
0.3 / 300Hz
Refer to Section
“Optional Filter
Installation” for more
information on
physical installation
of each filter
2.4 KHz is standard,
others are optional
F2
Same as F1
Same as F1
Default is nO
F3
Same as F2
Same as F1
Default is nO
EA d
Enable AM
detection
On / OFF
Requires 6.0 KHz
Filter Default is
OFF
EF d
Enable FM
detection
On / OFF
Requires 15.0 KHz
Filter Default is
OFF
bl i
Backlight
Intensity
0..15
Overall intensity of
the backlight.
bl r
Backlight red
level 0..15
Independent red level
adjustment
bl 9
Backlight
green level
0..15
Independent green
level adjustment
bl b
Backlight
blue level
0..15
Independent blue
level adjustment
Nb
Noise
Blanker
Installed
OFF On
Refer to section
“Internal Hardware
Noise Blanker”
tu n
Internal Auto
Tuner
Installed
OFF On
Refer to section
“Internal Tuner”
Table 1.7-1 Configuration Menu Items