1 2 3
4 5 6
20
en
NOTE
Ensure the Change Indicator is straight. Smooth any
sensor strip wrinkles, then press rmly to ensure the
Change Indicator has full contact with the TENA
absorbent product.
Keep folded
Place tightly
Align with the top
of the thicker
absorbent area
Find the front
Every time you change an
incontinence product, press both
buttons simultaneously for two
seconds to reset the transmitter
to register the change in the app.
Apply the absorbent product
with the Change Indicator to
your loved one.
FRONT
TENA Comfort
The TENA SmartCare Change Indicator™ should always be attached when the
incontinence product is folded and before it has been applied to the user.
To Next Page
Loading...