Tenda AC11 User Manual

19
---End
Wait a moment. When “Connected. You can access the internet.” is shown on the page, the router
is connected to the internet.
If you still cannot access the internet, try the following solutions:
 If “Error: No response from the remote server. Please contact your ISP.” is shown on the page, you
are recommended to set the Connection Type to Dynamic IP Address.
 If the problem persists, refer to 3.1 View internet connection status to find a solution.
Parameter description
Parameter
Description
User Name
It specifies the PPPoE user name and password provided by your ISP.
Password
Connection Status
It specifies the connection status of the WAN port.
⚫
When “Connected. You can access the internet now.” is shown here, the router is
connected to the internet successfully.
⚫
When other information is shown here, the router fails to connect to the internet.
Please take corresponding measures according to the information shown here.

Tenda AC11 Specifications

General

Max WiFi Speed	1200 Mbps
Frequency Bands	2.4 GHz, 5 GHz
RAM	128 MB
MU-MIMO	Yes
WiFi Standard	IEEE 802.11ac
Wireless Standards	IEEE 802.11ac/a/n/g/b
Wireless Speed	300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
Antennas	5 external antennas
Ports	1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports
Interface	Web-based Interface
Button	WPS/Reset
Security	WPA-PSK/WPA2-PSK
Power Input	100-240V AC, 50/60 Hz