37
1. Change the WiFi Name of the 2.4 GHz network, which is John_Doe_2.4GHz in this
example.
2. Choose an Encryption Mode, which is WPA/WPA2-PSK Mixed in this example.
3. Change the WiFi Password of the 2.4 GHz network, which is Tenda+Wireless24 in this
example.
Step 5 Change the parameters of the 5 GHz network.
1. Change the WiFi Name of the 5 GHz network, which is John_Doe_5GHz in this example.
2. Choose an Encryption Mode, which is WPA/WPA2-PSK Mixed in this example.
3. Change the WiFi Password of the 5 GHz network, which is Tenda+Wireless5 in this
example.
Step 6 Click OK on the bottom of the page.
---End
When completing the configurations, you can connect your wireless devices to the WiFi networks
of the router to access the internet.
5.1.4 Hide the WiFi network
Configuring procedures:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Wireless Settings > WiFi Name and Password.
Step 3 Tick Hide WiFi of the target network.
Step 4 Click OK on the bottom of the page.
To Next Page
Loading...
