Tenda AC11 User Manual

72
9.5 DDNS
9.5.1 Overview
DDNS normally interworks with port forwarding, DMZ host and remote management, so that the
internet users can be free from the influence of dynamic WAN IP address and access the internal
server or the router’s web UI with a fixed domain name.
To access the configuration page, log in to the web UI of the router, and choose Advanced > DDNS.
This function is disabled by default. When it is enabled, the page is shown as below.
Parameter description
Parameter
Description
DDNS
It specifies whether to enable the DDNS function.
Service Provider
It specifies a DDNS service provider, including oray.com, 88ip.cn and dyn.com.
DDNS User Name
It specifies the user name and password registered on a DDNS service provider's website
for logging in to the DDNS service.
DDNS Password
DDNS Host Name
It specifies the domain name you applied on the website of your service provider.
It is only required when dyn.com is chosen as the service provider.
Connection
Status
It specifies the current connection status of the DDNS service.

Tenda AC11 Specifications

General

Max WiFi Speed	1200 Mbps
Frequency Bands	2.4 GHz, 5 GHz
RAM	128 MB
MU-MIMO	Yes
WiFi Standard	IEEE 802.11ac
Wireless Standards	IEEE 802.11ac/a/n/g/b
Wireless Speed	300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
Antennas	5 external antennas
Ports	1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports
Interface	Web-based Interface
Button	WPS/Reset
Security	WPA-PSK/WPA2-PSK
Power Input	100-240V AC, 50/60 Hz